Model Overview

This is a fully self-contained Emergency Safety Shower with a 600 gallon water tank, compartment separation curtain, tank heater assembly, high capacity pump assembly and water temperature gauge. This model shares its basic features with an Emergency Safety Shower DS and also includes interior light, emergency activation button, alarm system and electrical junction box.

>> Suitable for outdoor installation in all climates
>> Electrical: General-Purpose, Class I Division 1 / 2 Hazardous Locations
>> Additional options are available
 

Other Models Available

  • Emergency Safety Shower DS
  • Emergency Safety Shower IWHS
  • Emergency Safety Shower SCX
  • Emergency Safety Shower SC 800
  • Emergency Safety Shower 16S

Specifications

 
Models Width Length Height Weight
  FT FT FT LBS
ES DS & IWHS 10'6" 5'10" 10'3" 3100
ES SC 10'6" 5'10" 10'3" 3200
ES SCX 13'8" 5'10" 10'3" 3400
ES SC 800 14' 6'6" 10'3" 3700
Hybrid ES 16S 10' 17'8" 10' 5600
 

Applications

  • Emergency Safety Shower

Accessories

Space Heater / Air Conditioner

# Capability of maintaining a stable temperature environment during various seasons of the year.

Electrical Configuration

# All of Emergency Safety Showers can be equipped for General Purpose or Class I Division 1 / 2 Hazardous Locations.

Arctic Insulation

# Package includes upgrade of insulation from standard R11 to R20 for walls and R30 for a ceiling. Upgrade may also include an insulating skirting around the sump.

Sump Capacity Upgrade

# Increase of standard sump capacity from a 135 gallon to a 560 gallon size. This allows containment of the entire hot water tank volume that equals to 25 minutes of continuous shower operation.

Hands Free Alarm Activation Sensor System

# Automatic alarm and water system pressurization is activated by person entering shower cabinet. Can be achieved with door or floor activation sensors.

Trailer Mount Package

# Emergency Safety Shower can be configured to fit any mobile trailer.

Step-Down Power Transformer

# Adapts any power source to fit Emergency Safety Shower power requirements.

Custom Alarm System

# Every Emergency Safety Shower alarm can be configured to clients’ specifications and needs.

Ramp

# Facilitates the entrance to the Emergency Safety Shower.

Standard Power Service

# 120/240 Volt, Single Phase, 60 Hz. Approximate maximum amperage draw is 60 Amp.

Request More Information

Download A PDF Brochure

Download PDF Brochure

Emergency Safety Shower Brochure 2011
Download Brochure

Download PDF Brochure

8 1003-Emergency Showers
Download Brochure

Download PDF Brochure

PRO-TEC Secure Storage Brochure 2011
Download Brochure

 

Let us get in touch with you!

 

 

Certifications

The Owner or the owner’s Authorized Agent is responsible for carrying out the provisions of their respective Fire, Building, and Electrical Codes. The respective Authority Having Jurisdiction (AHJ) should be contacted and will be able to help comply with local codes. Other considerations are the Environmental Protection Agency and Occupational Health and Safety Standards.

Read More

All personnel working at a PRO-TEC should be trained in the following:

  • Safe handling of the stored material; and
  • Correct response to an emergency; and
  • Correct procedures including knowledge of all the applicable regulations.
Read More

Tie Downs & Paint Touch Up Kits

All PRO-TEC Storage Solutions are loaded at the plant using heavy equipment and are secured to the bed of the vehicle with tie down chains or straps. It is anticipated that this may result in minor paint damage on the base due to the shipping and loading procedures. PRO-TEC supplies a paint touchup aerosol to allow the end user to repair the areas that may have been damaged during the loading and shipping process.

Shipping Claim Procedure

On arrival of the transport truck at your site, please make sure that your PRO-TEC Storage Solution has arrived in its proper condition before signing off on the waybill. Any problems must be documented on the driver’s waybill. In all cases, we recommend that your authorized personnel be present at offloading.

Options and Accessories

Whenever possible, most options or accessories ordered with your PRO-TEC will be installed, or will be secured within the facility. Please verify you have received all items ordered. Some site assembly of accessories may be required.

Offloading

Easily offloaded with a forklift or a crane with spreader bar. Forklift pockets are 52 in. (1.32 m) apart from center of pocket. The pocket dimension is 9in. L x 4in. H (22.86 cm L x 10.2 cm H).

X-TREME ENERGY GROUP Inc. (“X-TREME”) warrants the Products to be free of defects in materials and workmanship if properly installed, cared for and operated in accordance with the PRO-TEC Owner’s Manual.

Failure to abide by the PRO-TEC Owner’s Manual will void this Warranty. THE EXPRESS WARRANTY SET FORTH IN THIS PARAGRAPH IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, CONDITIONS AND TERMS AS TO QUALITY, FITNESS OR PERFORMANCE OF THE PRODUCTS (WHETHER WRITTEN, ORAL OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND ALL SUCH OTHER WARRANTIES, CONDITIONS AND TERMS ARE HEREBY DISCLAIMED AND EXCLUDED BY X-TREME.

Read More