Model Overview
Warehouse Emergency Safety Showers are designed to be installed in a heated environment or retrofitted into various portable enclosures and structures. Design is based on outdoor version, excluding some structural elements and insulation panels.
Similar to the outdoor version, Emergency Safety Shower SC-W (Self-Contained Warehouse configuration) provides on-the-spot decontamination in a heated environment. Standard features include an emergency eyewash, shower and drench hose system, heavy duty 135 gallon sump, 600 gallon water tank, shower curtain, tank heater assembly, high capacity pump assembly and water temperature gauge. This model also comes complete with an emergency activation button, alarm system, internal light, electrical junction box, 3” capped drain and galvanized “Safety Grip” channel flooring.
- Suitable for indoor installation only
- Electrical: General-Purpose, Class I Division 1 / 2 Hazardous Locations
- Additional options are available
Emergency Safety Shower - Warehouse configuration is also available in these models:
- Emergency Safety Shower DS-W (Direct Water Source – Warehouse configuration)
- Emergency Safety Shower IWHS-W (Inline Water Heater System – Warehouse configuration)
All PRO-TEC Emergency Safety Showers are built and certified to ANSI/ISEA Z358.1 - 2009 standards. Custom design can be built based on clients’ specifications and requirements.
Specifications
| Models | Width | Length | Height | Weight |
|---|---|---|---|---|
| FT | FT | FT | LBS | |
| ES SC-W | 10'6" | 5'10" | 9' | 3000 |
| ES DP & IWHS-W10'6" | 10'6" | 5'10" | 9' | 2900 |
Applications
- Emergency Safety Shower
Accessories
Electrical Configuration
All of Emergency Safety Showers can be equipped for General Purpose or Class I Division 1 / 2 Hazardous Locations.Sump Capacity Upgrade
Increase of standard sump capacity from a 135 gallon to a 560 gallon size. This allows containment of the entire hot water tank volume that equals to 25 minutes of continuous shower operation.Hands Free Alarm Activation Sensor System
Automatic alarm and water system pressurization is activated by person entering shower cabinet. Can be achieved with door or floor activation sensors.Step-Down Power Transformer
Adapts any power source to fit Emergency Safety Shower power requirements.Custom Alarm System
Every Emergency Safety Shower alarm can be configured to clients’ specifications and needs.Ramp
Facilitates the entrance to the Emergency Safety Shower.Request More Information
Let us get in touch with you!
The Owner or the owner’s Authorized Agent is responsible for carrying out the provisions of their respective Fire, Building, and Electrical Codes. The respective Authority Having Jurisdiction (AHJ) should be contacted and will be able to help comply with local codes. Other considerations are the Environmental Protection Agency and Occupational Health and Safety Standards.
All personnel working at a PRO-TEC should be trained in the following:
- Safe handling of the stored material; and
- Correct response to an emergency; and
- Correct procedures including knowledge of all the applicable regulations.
Tie Downs & Paint Touch Up Kits
All PRO-TEC Storage Solutions are loaded at the plant using heavy equipment and are secured to the bed of the vehicle with tie down chains or straps. It is anticipated that this may result in minor paint damage on the base due to the shipping and loading procedures. PRO-TEC supplies a paint touchup aerosol to allow the end user to repair the areas that may have been damaged during the loading and shipping process.
Shipping Claim Procedure
On arrival of the transport truck at your site, please make sure that your PRO-TEC Storage Solution has arrived in its proper condition before signing off on the waybill. Any problems must be documented on the driver’s waybill. In all cases, we recommend that your authorized personnel be present at offloading.
Options and Accessories
Whenever possible, most options or accessories ordered with your PRO-TEC will be installed, or will be secured within the facility. Please verify you have received all items ordered. Some site assembly of accessories may be required.
Offloading
Easily offloaded with a forklift or a crane with spreader bar. Forklift pockets are 52 in. (1.32 m) apart from center of pocket. The pocket dimension is 9in. L x 4in. H (22.86 cm L x 10.2 cm H).
X-TREME ENERGY GROUP Inc. (“X-TREME”) warrants the Products to be free of defects in materials and workmanship if properly installed, cared for and operated in accordance with the PRO-TEC Owner’s Manual.
Failure to abide by the PRO-TEC Owner’s Manual will void this Warranty. THE EXPRESS WARRANTY SET FORTH IN THIS PARAGRAPH IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, CONDITIONS AND TERMS AS TO QUALITY, FITNESS OR PERFORMANCE OF THE PRODUCTS (WHETHER WRITTEN, ORAL OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND ALL SUCH OTHER WARRANTIES, CONDITIONS AND TERMS ARE HEREBY DISCLAIMED AND EXCLUDED BY X-TREME.
